TI TVP5150AM1IPBSR

视频解码器移动电话，PDA，播放器1.8V1.8V，3.3V表面贴装型

Overview

The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption. The decoder consumes 115-mW power under typical operating conditions and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150AM1 decoder can be programmed using an I 2C serial interface. 

· Accepts NTSC(J,M,4.43), PAL(B,D,G,H,I, M,N, Nc), and SECAM(B,D,G,K,K1,L) Video · Supports ITU-R BT.601 Standard Sampling · High-Speed 9-Bit Analog-to-Digital Converter (ADC) · Two Composite Inputs or One S-Video Input · Fully Differential CMOS Analog Preprocessing Channels With Clamping and Automatic Gain Control (AGC) for Best Signal-to-Noise(S/N) Performance · UItralow Power Consumption ·48-Terminal PBGA Package(ZQC) or 32-Terminal TQFP Package(PBS) · Power-Down Mode:<1 mW · Brightness, Contrast, Saturation, Hue, and Sharpness Control Through IPc · Complementary 4-Line (3-H Delay) AdaptiveComb Filters for Both Cross-Luminance and Cross-Chrominance Noise Reduction · Patented Architecture for Locking to Weak, Noisy, or Unstable Signals · Single 14.31818-MHz Crystal for All Standards · Internal Phase-Locked Loop(PLL) for Line-Locked Clock and Sampling · Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder ·3.3-V Digital I/O Supply Voltage Range · Standard Programmable Video Output Formats -ITU-R BT.656,8-Bit 4:2:2 With Embedded Syncs -8-Bit 4:2:2 With Discrete Syncs · Macrovision Ta Copy Protection Detection · Advanced Programmable Video Output Formats -2xOversampled Raw Vertical Blanking Interval(VBlI) Data During Active Video -Sliced VBI Data During Horizontal Blanking or Active Video · VBI Modes Supported-Teletext(NABTS, WST) -Closed-Caption Decode With FIFO and Extended Data Services(XDS) -Wide Screen Signaling, Video ProgramSystem, CGMS-A, Vertical Interval Time Code -Gemstar 1x/2x Electronic Program Guide Compatible Mode -Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data Signals · Power-On Reset · Industrial Temperature Range (TVP5150AM11):-40°℃ to 85℃ · Qualified for Automotive Applications (AEC-Q100 Rev G-TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)

Features

Tape & Reel (TR) Package
In 32-TQFP package
Mounting Type: Surface Mount
Base Part Number: TVP5150
32 pins
9 bits
1 A/D Converters
2 channels

1.8V Voltage - Supply, Analog

Applications

There are a lot of Texas Instruments
TVP5150AM1IPBSR Encoders, Decoders, Converters applications.

• Home Automation
• Industrial Automation
• Remote Status Monitoring
• Lighting Control
• Low-voltage operation
• Extended temperature range
• Low power consumption
• UART Interfacing
• Infrared Data Communications
• Audio