TI TPD4S214YFFR

内部开关1

Overview

The TPD4S214YFFR is a single-chip protection solution for USB On-the-Go (OTG) and other current limited USB applications. This device includes an integrated low RDS(ON) N-channel current limited switch for the OTG current supply to peripheral devices. TPD4S214YFFR offers low capacitance transient voltage suppression (TVS) electrostatic discharge (ESD) clamping diodes for the D+, D–, and ID pins for both USB2.0 and USB3.0 applications. The VBUS pin can handle continuous voltage ranging from –7 V to 30 V. The over voltage lock-out (OVLO) at the VBUS pin ensures that if there is a fault condition at the VBUS line, TPD4S214YFFR is able to isolate it and protect the internal circuitry from damage. Similarly, the under voltage lock out (UVLO) at the VOTG_IN pin ensures that there is no power drain from the internal OTG supply to external VBUS if VOTG_IN droops below a safe operating level. When EN is high, the OTG switch is activated and the FLT pin indicates whether there is a fault condition. The soft start feature waits 16 ms to turn on the OTG switch after all operating conditions are met.

The TPD4S214 is a single-chip protection solution for USB On-the-Go (OTG) and other current limited USB applications. This device includes an integrated low RDS(ON) N-channel current limited switch for the OTG current supply to peripheral devices. TPD4S214 offers low capacitance transient voltage suppression (TVS) electrostatic discharge (ESD) clamping diodes for the D+, D–, and ID pins for both USB2.0 and USB3.0 applications. The VBUS pin can handle continuous voltage ranging from –7 V to 30 V. The over voltage lock-out (OVLO) at the VBUS pin ensures that if there is a fault condition at the VBUS line, TPD4S214 is able to isolate it and protect the internal circuitry from damage. Similarly, the under voltage lock out (UVLO) at the VOTG_IN pin ensures that there is no power drain from the internal OTG supply to external VBUS if VOTG_IN droops below a safe operating level. When EN is high, the OTG switch is activated and the FLT pin indicates whether there is a fault condition. The soft start feature waits 16 ms to turn on the OTG switch after all operating conditions are met.

Features

• Over Voltage Lock Out for VBUS

• Under Voltage Lock Out for VOTG_IN 

• Thermal Shutdown and Short Circuit Protection

• Auto Retry on any Fault; No Latching Off States

• Integrated VBUS Detection Circuit

• Low Capacitance TVS ESD Clamp for USB2.0 High Speed Data Rate

• Internal 16ms Startup Delay

• Space Saving WCSP (12-YFF) Package

• UL Listed and CB File No. E169910

• Input Voltage Protection at VBUS from –7 V to 30 V

• IEC61000-4-2 Level 4 ESD Protection

– ±15-kV Contact Discharge

– ±15-kV Air Gap Discharge

• IEC 61000-4-5 Surge Protection

– 7.8 A (8/20 μs)

• Low RDS(ON) N-CH FET Switch for High Efficiency

• Compliant with USB2.0 and USB3.0 OTG spec

• User Adjustable Current Limit From 250 mA to Beyond 1.2 A

• Built-in Soft-start

• Reverse Current Blocking

Applications

• Cell Phones

• Tablet, eBook

• Portable Media Players

• Digital Camera