TI SN74GTLP817DWR

混合信号

Overview

The SN74GTLP817DWR is a medium-drive fanout driver that provides LVTTL-to-GTLP and GTLP-to-LVTTL signal-level translation. The device provides a high-speed interface between cards operating at LVTTL logic levels and a backplane operating at GTLP signal levels. High-speed (about three times faster than standard TTL or LVTTL) backplane operation is a direct result of GTLP reduced output swing (<1 V), reduced input threshold levels, improved differential input, and OEC circuitry. The improved GTLP OEC circuitry minimizes bus settling time and has been designed and tested using several backplane models. The medium drive allows incident-wave switching in heavily loaded backplanes with equivalent load impedance down to 19 . BO1 and BO2 can be tied together to drive an equivalent load impedance down to 11 .

When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, the output-enable (OE\) input should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Features

74GTLP Series
24-SOIC (0.295, 7.50mm Width) package
2 circuits
24 pin count
74GTLP series
24 pins

Surface Mount Mounting Type

Applications

There are a lot of Texas Instruments
SN74GTLP817DWR voltage translators & level shifters applications.

• PMBus
• SMBus
• SDIO
• UART
• I2C
• Automotive
• Personal computing
• Automotive infotainment
• Advanced Driver Assistance System (ADAS)
• Telematics