TI MF10CCN

通用开关电容器200kHz24th±9V ~ 14V

Overview

The MF10CCN is an universal monolithic dual switched Capacitor Filter. This general purpose CMOS active filter building block with an external clock and 3 to 4 resistors can produce various 2nd order functions. Each building block has 3 output pins. One of the outputs can be configured to perform an all-pass, high-pass or a notch function, the remaining 2 output pins perform low-pass and band-pass functions. The centre frequency of the low-pass and band-pass 2nd order functions can be either directly dependent on the clock frequency or they can depend on both clock frequency and external resistor ratios. The centre frequency of the notch and all-pass functions is directly dependent on the clock frequency, while the high-pass centre frequency depends on both resistor ratio and clock. Up to 4th order functions can be performed by cascading the two 2nd order building blocks of the MF10. Any of the classical filter configurations (Butterworth, Bessel, Cauer and Chebyshev) can be formed.

Features

Tube Package
Supply voltage of 5V
Maximum operating temperature of 70°C
Mount of Through Hole
30kHz frequency

Through Hole Mounting Type

Applications

There are a lot of Texas Instruments
MF10CCN active filters applications.

• lmage Filtering
• Edge Detectlon/Enhancement
• Pattern Matching
• Real Time Video Filters
• 1-D and 2-D FIR Filters
• Radar/Sonar
• Adaptive Filters
• Echo Cancellation
• Complex Multiply-Add
• Sample Rate Converters