TI LMH2832IRHAR

1.1GHz16.5dBm30dB6.5dB5V

Overview

The LMH2832IRHAT is a high-linearity, dual-channel, digital variable-gain amplifier (DVGA) for high-speed signal chain and data-acquisition systems. The LMH2832IRHAT is optimized to provide high bandwidth, low distortion, and low noise, thus making the device ideally suited as a dual, 14-bit, analog-to-digital converter (ADC) driver. The device consists of one fixed-gain block and one variable attenuator consisting of a total gain of 30 dB with a maximum attenuation of 39 dB. The gain range is from 30 dB to –9 dB in 1-dB gain steps with a gain accuracy of ±0.2 dB. The input impedance can be easily matched to 50-Ω or 75-Ω systems using a 1:3-Ω or 1:2-Ω ratio balun, respectively. The LMH2832IRHAT is designed to drive general-purpose ADCs and also meets the requirements for both data over cable service interface specification (DOCSIS) 3.0 32 quadrature amplitude modulation (QAM) carriers and DOCSIS 3.1 wideband orthogonal frequency-division multiplexing (OFDM) systems. With excellent NF (6.5 dB) and linearity, the LMH2832IRHAT is designed to perform to within DOCSIS specifications. The quiescent current in the power-down state is less than 5 mA per channel with the typical current consumption during operation at 105 mA per channel.

Features

Tape & Reel (TR) Package
5V voltage
40 pins
108mA current

Surface Mount Mounting Type

Applications

There are a lot of Texas Instruments
LMH2832IRHAR RF Amplifiers applications.

• Cellular Phones with GPS
• Notebook PC
• Ultra-Mobile PC
• Recreational
• Marine Navigation
• Avionics
• GPS
• GLONASS
• BeiDou
• Galileo