TI DS1834A

多压监控器3.3V，5V2

Overview

The DS1834A Dual EconoReset with Pushbutton is designed to monitor power and protect processing in dual-voltage systems. It operates from the higher of a 3-volt or 5-volt input, monitoring both for in-tolerance conditions. When safety thresholds are breached from either input, the DS1834A initiates reset. On power return, it automatically restarts the processor, maintaining reset for 350ms to allow stabilization. The DS1834A also monitors a pushbutton input to allow for external over-ride. Using pin adjustments, voltage reset tolerances can be set in different combinations for the 5V and 3.V power supplies, respectively: 10% and 10% 10% and 20% and 5% and 10%. DS1834A NMOS outputs can be wire-AND'd to either the 5-volt or 3-volt level. The DS1834A and DS1834D have CMOS outputs for low-current operation. The DS1834A is targeted for multi-voltage microprocessor systems and subsystems, or for buses that do not operate at the same voltage as the μP or core logic. By integrating monitoring functions required for a particular application, the DS1834A enhances processor reliability with considerable savings in space and cost.

Features

EconoReset Series
Multi-Voltage Supervisor type
Minimum supply voltage of 1.2V
50μA operating supply current

2 Number of Voltages Monitored

Applications

There are a lot of Maxim Integrated
DS1834A+ Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment