TI DRV8838DSGR

驱动器 - 全集成，控制和功率级1.8A1.8V ~ 7V

Overview

The DRV8837DSGR is IC MOTOR DRIVER PAR 8WSON, that includes DRV8837 Series, they are designed to operate with a Brushed DC Motor Drivers Product, Type is shown on datasheet note for use in a Low-Voltage H-Bridge IC, that offers Packaging features such as Digi-ReelR Alternate Packaging, Unit Weight is designed to work in 0.000384 oz, as well as the SMD/SMT Mounting Style, it has an Operating Temperature Range range of - 40 C to + 85 C. In addition, the Package Case is 8-WFDFN Exposed Pad, the device is offered in NMOS Technology, it has an Operating Temperature range of -40°C ~ 150°C (TJ), and Mounting Type is Surface Mount, and the Applications is DC Motors, Solenoids, and Interface is PWM, and the Voltage Supply is 1.8 V ~ 7 V, and Supplier Device Package is 8-WSON (2x2), and the Number of Outputs is 1 Output, and Fault Protection is Current Limiting, Over Temperature, Short Circuit, UVLO, and the Output Configuration is Half Bridge (2), and Load Type is Inductive, and the Rds On Typ is 280 mOhm LS + HS, and Current Peak Output is 1.8A, and the Voltage Load is 0 V ~ 11 V, and Operating Supply Voltage is 1.8 V to 11 V, and the Operating Supply Current is 300 uA, and Load Voltage Rating is 1.8 V to 11 V, and the Output Current is 1.8 A, and Development Kit is DRV8837EVM.

The DRV8837EVM is EVAL MODULE FOR DRV8837, that includes Yes, MCU, 16-Bit Embedded, they are designed to operate with a 1.8 V to 11 V Input Voltage, Main Purpose is shown on datasheet note for use in a Power Management, Motor Control, that offers Output Current features such as 1.8 A, Packaging is designed to work in Bulk, as well as the Single-H-Bridge Driver Primary Attributes, the device can also be used as Evaluation Modules Product. In addition, the Tool Is For Evaluation Of is DRV8837, the device is offered in Motor / Motion Controllers & Drivers Type, the device has a DRV8837 of Utilized IC Part.

Features

• Protection Features

– VCC Undervoltage Lockout (UVLO)

– Overcurrent Protection (OCP)

– Thermal Shutdown (TSD)

• H-Bridge Motor Driver

– Drives a DC Motor or Other Loads

– Low MOSFET On-Resistance: HS + LS 280 mΩ

• PWM or PH-EN Interface

– DRV8837: PWM, IN1 and IN2

– DRV8838: PH and EN

• Small Package and Footprint

– 8-Pin WSON With Thermal Pad

– 2.0 × 2.0 mm

• 1.8-A Maximum Drive Current

• Separate Motor and Logic Supply Pins:

– Motor VM: 0 to 11 V

– Logic VCC: 1.8 to 7 V

• Low-Power Sleep Mode With 120-nA Maximum Sleep Current

– nSLEEP pin

Applications

• Toys

• Cameras

• Robotics

• DSLR Lenses

• Medical Devices

• Consumer Products