TI DRV8313RHHR

驱动器 - 全集成，控制和功率级8V ~ 60V

Overview

The DRV8313RHHR provides three individually controllable half-H-bridge drivers. It is intended to drive a three-phase brushless dc motor, though it can also be used to drive solenoids or other loads.

The design brings the ground terminals of each driver to pins, to allow one to perform current sensing on each output. Current-limit circuitry or other functions are possible uses of an uncommitted comparator. The DRV8313RHHR can supply up to 2.5-A peak or 1.75-A rms output current per channel (with proper PCB heatsinking at 24 V and 25°C) per half-H-bridge.

Features

Tape & Reel (TR) Package
Applications : General Purpose
Load voltage across the chip 8V~60V
base on DRV8313 number
designed with 1 outputs

Surface Mount Mounting Type

Applications

There are a lot of Texas Instruments
DRV8313RHHR motor drivers applications.

• Dash
• Footwell lighting
• Indicator
• Telltale lights
• Infotainment backlighting
• Tail lights
• Turn signals
• Brake lights
• CHMSL (center high-mount stop lamps)
• parking lights