Microchip USB5744T-I/2G

USB集线器控制器USB1.2V，3.3V

Overview

Microchip’s USB5744T-I/2G SmartHub™ IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), low power, low pin count configurable and fully compliant with the USB 3.1 Gen 1 specification. The USB5744T-I/2G also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.The USB5744T-I/2G is in a 0.4mm pitch, 56 pin QFN.  It's the smallest 4 port USB 3.1 Gen 1 hub in the industry.  Functionality was reduced to optimize pin count and provide a cost effective solution. SmartHub ICs are defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor. Microchip’s USB5744T-I/2G Smart Hub support custom configurations of external ports and GPIO pins. MPLAB Connect Configurator, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM which stores required register settings to ensure the desired start up configuration at power on. All port control signal pins and GPIOs are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5744T-I/2G can be configured through a series of external low-cost resistor bootstraps.  No OTP programming required.

*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Features

Tape & Reel (TR) Package

1.2V, 3.3V Voltage - Supply

Applications

There are a lot of Microchip Technology
USB5744T-I/2G Controllers Interface ICs applications.

• Dimming Control Devices
• Commercial LED Lighting
• Smart LED Lighting
• Portable Appliances
• Battery-Operated Devices
• Cellular Data Devices
• Factory Automation and Process Controls
• IrDA transmission control
• Remote transmission formatter
• Docking