Microchip MD0105K6-G

高电压表面贴装型

Overview

MD0105K6-G is a high voltage current limiting protection device. It is designed to protect a low noise receiver from the high voltage transmit pulses in ultrasound applications and is commonly referred to as a T/R (transmit and receive) switch.The MD0105K6-G can be considered as a normally closed switch with a typical switch resistance of 15O, allowing small signals to pass. Once the voltage drop across the two terminals exceeds a nominal value of ±2.0V, the device will start to turn off. In the off state, the MD0105K6-G can withstand up to ±130V across its terminals. A small amount of current, typically 200µA, is allowed to flow through.The MD0105K6-G is not limited to just ultrasound applications. It can also be used for resettable fuses to protect power lines, output short circuit protection, and data acquisition. The MD0105K6-G is available in an 18-Lead 5x5mm DFN package as a four-channel device.

For any questions regarding the MD0105, please contact your local area Supertex sales office, or contact the main office in the US at: Telephone:408-222-8888 Fax:408-222-4895 EMail:[email protected] Website: www.supertex.com

Features

Tray Package
It is based on MD0105.
Telecom IC Type : TELECOM CIRCUIT

Surface Mount Mounting Type

Applications

There are a lot of Microchip Technology
MD0105K6-G Specialized Interface ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and