Microchip MCP1402T-E/OT

低端14.5V ~ 18V

Overview

The MCP1401/02 are high-speed MOSFET drivers capable of providing 500 mA of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V). These devices also feature low shoot-through current, matched rise/fall times and propagation delays which make them ideal for high switching frequency applications.

These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the Ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 1 kV (HBM) and 300V (MM).

Features

Tape & Reel (TR) Package
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 390mW

Surface Mount Mounting Type

Applications

There are a lot of Microchip Technology
MCP1402T-E/OT gate drivers applications.

• Video amplifiers
• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays