Microchip HV9910BNG-G

DC DC 控制器8V450V

Overview

The HV9910BNG-G is an open loop, current mode, control LED driver IC. The HV9910BNG-G can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8.0 - 450V linear regulator which allows it to work from a wide range of input voltages without the need for an external low voltage supply. The HV9910BNG-G includes a PWM dimming input that can accept an external control signal with a duty ratio of 0 - 100% and a frequency of up to a few kilohertz. It also includes a 0 - 250mV linear dimming input which can be used for linear dimming of the LED current. The HV9910BNG-G is ideally suited for buck LED drivers. Since the HV9910BNG-G operates in open loop current mode control, the controller achieves good output current regulation without the need for any loop compensation. PWM dimming response is limited only by the rate of rise and fall of the inductor current, enabling very fast rise and fall times. The HV9910BNG-G requires only three external components (apart from the power stage) to produce a controlled LED current making it an ideal solution for low cost LED drivers.

Features

Tube Package
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 25kHz 100kHz
Supply voltage of 12V

Surface Mount Mounting Type

Applications

There are a lot of Microchip Technology
HV9910BNG-G LED Driver ICs applications.

• General lighting
• Down lighting
• Architectural lighting
• Street lighting
• Stage and Studio lighting
• Refrigeration lighting
• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting