Microchip HV892K7-G

液滴透镜8mA2.65V ~ 5.5V

Overview

The HV892K7-G liquid lens driver is controlled via an I2C interface, is capable of driving capacitive loads of up to 200pF, and is compatible with 40VRMS to 60VRMS lenses.A single byte (AMP) written to the HV892K7-G controls the operation of the driver.Setting AMP = 01h to FFh controls output amplitude in 255 monotonic steps. Setting AMP = 00h causes the HV892K7-G to go into low power standby mode, consuming less than 1.0µA. When active, the HV892K7-G draws less than 20mA.A charge pump boost converter integrated on-chip provides the high voltage necessary for driving the lens. No external inductors or diodes are needed. Two ceramic chip capacitors are the only external components required for a complete lens driver circuit.An H-bridge output stage provides AC drive to the lens, allowing the use of a single high voltage boost converter while providing alternating polarity to the lens. Controlled rising and falling edges on the drive waveform reduces EMI. The HV892K7-G is offered in a 10-Lead 4x4mm DFN package.

Features

Tape & Reel (TR) Package
Mainly used in Liquid Lens applications
Operating temperature: -40°C~85°C

Surface Mount Mounting Type

Applications

There are a lot of Microchip Technology
HV892K7-GPower Management applications.

• Optical imaging payload
• Desktop PC
• Motherboard
• Standard notebook PC
• Chromebook
• WOA
• Docking station
• Port/cable adapters
• Port/cable dongles
• Wireless routers