Infineon TLE9201SGAUMA1

半桥（2）6A5V ~ 28V

Overview

Infineon Technologies TLE9201SGAUMA1 6A H-Bridge with SPI is designed for (but not limited to) the control of DC motors or other inductive loads in automotive applications. The IFX9201SG is also optimized for non-automotive applications like industrial applications, home appliance, building automation, power tools battery management and medical applications. The outputs can be pulse width modulated at frequencies up to 20kHz. PWM/DIR control reduces the number of PWM capable pins needed on the microcontroller side. For load currents above the current limitation threshold (8A typ.) the H-Bridge goes into chopper current limitation mode. It's protected against short circuits and overtemperature and provides extensive diagnosis via SPI or basic error feedback via error flag. Open load can be detected when the bridge is disabled or during PWM operation of inductive loads. The robust PG-DSO-12-17 package provides excellent thermal capabilites due to the thick copper heat slug. Thanks to the protruding edges of the heatslug the package is well suited for automatic optical solder inspection.

Features

• RDS(on) (typ.) < 100mΩ per switch

• Operation voltage: 5.0 V to 28V

• Fully 3.3/5.5V compatible logic inputs

• Low standby current

• Short circuit and over-temperature protection

• VS under-voltage protection

• Open load detection in ON and OFF state

Applications

• Exhaust Gas Recirculation (EGR)??

• Variable Geometry Turbo (VGT)

• Idle Speed Control

• Swirl and Tumble Flaps

• Variable Intake Manifold

• Turbo Charger Waste Gate

• Auxiliary Water Pumps

• Industrial DC Motor applications