Infineon CYPAP212A1-14SXIT

隔离85V ~ 265V

Overview

PSoC Functional OverviewThe PSoC family consists of many Programmable System-on-Chips with On-Chip Controller devices. These devices are designed to replace multiple traditional MCU based system components with one low cost single chip programmable component. A PSoC device includes configurable analog and digital blocks and programmable interconnect. This architecture enables the user to create customized peripheral configurations to match the requirements of each individual application. Additionally, a fast CPU, flash program memory, SRAM data memory, and configurable I/O are included in a range of convenient pinouts.

■ Low power CapSense® block ❐ Configurable capacitive sensing elements ❐ Supports combination of CapSense buttons, sliders, touchpads, and proximity sensors■ Powerful Harvard-architecture processor ❐ M8C processor speeds running up to 12 MHz ❐ Low power at high speed ❐ Operating voltage: 2.4 V to 5.25 V ❐ Industrial temperature range: –40 °C to +85 °C■ Flexible on-chip memory ❐ 8 KB flash program storage 50,000 erase/write cycles ❐ 512-Bytes SRAM data storage ❐ Partial flash updates ❐ Flexible protection modes ❐ Interrupt controller ❐ In-system serial programming (ISSP)■ Complete development tools ❐ Free development tool (PSoC Designer™) ❐ Full-featured, in-circuit emulator, and programmer ❐ Full-speed emulation ❐ Complex breakpoint structure ❐ 128 KB trace memory■ Precision, programmable clocking ❐ Internal ±5.0% 6- / 12-MHz main oscillator ❐ Internal low speed oscillator at 32 kHz for watchdog and sleep■ Programmable pin configurations ❐ Pull-up, high Z, open-drain, and CMOS drive modes on all GPIOs ❐ Up to 28 analog inputs on all GPIOs ❐ Configurable inputs on all GPIOs ❐ 20-mA sink current on all GPIOs ❐ Selectable, regulated digital I/O on port 1 • 3.0 V, 20 mA total port 1 source current • 5 mA strong drive mode on port 1 versatile analog mux ❐ Common internal analog bus ❐ Simultaneous connection of I/O combinations ❐ Comparator noise immunity ❐ Low-dropout voltage regulator for the analog array■ Additional system resources ❐ Configurable communication speeds • I2C: selectable to 50 kHz, 100 kHz, or 400 kHz • SPI: configurable between 46.9 kHz and 3 MHz ❐ I2C slave ❐ SPI master and SPI slave ❐ Watchdog and sleep timers ❐ Internal voltage reference ❐ Integrated supervisory circuit

Features

Tape & Reel (TR) Package
Isolated Output Isolation
No Internal Switch(s)
500V Voltage - Breakdown
Flyback, Secondary Side SR Topology
85V ~ 265V Voltage - Supply (Vcc/Vdd)
70% Duty Cycle
30kHz Frequency - Switching
Current Limiting, Over Temperature, Over Voltage, Short Circuit, UVLO Fault Protection
Frequency Control, Soft Start Control Features
Surface Mount Mounting Type