Microsemi SG3844DM

隔离10V ~ 30V

Overview

The SG1844/45 family of control ICs provides all the required features to implement off-line Fixed Frequency, Current-mode switching power supplies with a minimum number of external components. Current-mode architecture demonstrates improved line regulation, improved load regulation, pulse-by pulse current limiting and inherent protection of the power supply output switch.The Bandgap reference is trimmed to ±1% over temperature. Oscillator discharge current is trimmed to less than ±10%. The SG1844/45 has under-voltage lockout, current-limiting circuitry and start-up current of less than 1mA. The totem-pole output is optimized to drive the gate of a power MOSFET. The output is low in the off state to provide direct interface to an Nchannel device. Both operate up to a maximum duty cycle range of zero to <50% due to an internal toggle flip-flop which blanks the output off every other clock cycle. The SG1844/45 is specified for operation over the full military ambient temperature range of -55°C to 125°C. The SG3844/45 is designed for the commercial range of 0°C to 70°C.

Features

Isolated Output Isolation
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 100Hz~500kHz
With 8 pins
Output Current at 200mA
Operating Supply Voltage at the range of 30V

Surface Mount Mounting Type

Applications

There are a lot of Microsemi Corporation
SG3844DM AC DC Converters applications.

• Linear Adapter Replacements
• Chargers for cell/cordless phones
• PDAs
• MP3
• Portable audio
• Adapters
• Networking
• Battery Chargers
• Power Adaptors
• Standby Power Supplies