Microsemi SG1527AJ

降压降压8V ~ 35V

Overview

The SG1525A/1527A series of pulse width modulator integrated circuit s are designed to offer improved performance and lower external parts count when used to implement all types of switching power supplies. The  on-chip +5.1 V reference is trimmed to ±1% initial accuracy and the input common-mode range of the error amplifier includes the reference voltage, eliminating external potentiometers and  divider resistors. A Sync input to the oscillator allows multiple units to be slaved together, or a single unit to be synchronized to an external system clock. A single resistor between the CT pin and the D ischarge pin provides a wide range of deadtime adjustment. These devices also feature built-in soft-start circuitry with only a timing capacitor required externally. A Shutdown pin controls both the soft -start circuitry and the output stages, providing instantaneous turn-off with soft-start recycle for slow turn-on. These functions are also controlled by an undervoltage lockout which keeps the outputs o ff and the soft-start capacitor discharged for input voltages less than that required for normal operation. Another unique feature of these PWM circuits is a latch following the comparator. Once a  PWM pulse has been terminated for any reason, the outputs remain off for the duration of the period. The latch is reset with ea ch clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200mA. The SG1525A output stage features NOR logic, giving a LOW output for an OFF  state. The SG1527AJ utilizes OR logic, which results in a HIGH output level when OFF.

Features

Tray Package
Transistor Driver Output Type
Positive Output Configuration
Buck Topology
2 Number of Outputs
1 Output Phases
8V ~ 35V Voltage - Supply (Vcc/Vdd)
100Hz ~ 500kHz Frequency - Switching
49% Duty Cycle (Max)
No Synchronous Rectifier
Yes Clock Sync
Dead Time Control, Enable, Frequency Control, Ramp, Reset, Soft Start, Sync Control Features
Through Hole Mounting Type