Microsemi MAX3679CTJ+T

是

Overview

The MAX366 and MAX3679CTJ+ are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. These devices are used at interfaces where sensitive circuits are connected to the external world and could encounter damaging voltages (up to 35V beyond the supply rails) during power-up, power-down, or fault conditions. The MAX366 contains three independent protectors and the MAX3679CTJ+ contains eight. They can protect analog signals using either unipolar (4.5V to 36V) or bipolar (±2.25V to ±18V) power supplies. Each protector is symmetrical. Input and output terminals may be freely interchanged. These devices are voltage-sensitive MOSFET transistor arrays that are normally on when power is applied and normally open circuit when power is off. With ±10V supplies, on-resistance is 100Ω max and leakage is less than 1nA at +25°C. When signal voltages exceed or are within approximately 1.5V of either power-supply voltage (including when power is off), the two-terminal resistance increases dramatically, limiting fault current as well as output voltage to sensitive circuits. The protected side of the switch maintains the correct polarity and clamps approximately 1.5V below the supply rail. There are no "glitches" or polarity reversals going into or coming out of a fault condition.

Features

Tape & Reel (TR) Package
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 225
Include 1 Circuits
run the output at th range of LVCMOS, LVPECL

0°C ~ 70°C Operating Temperature

Applications

There are a lot of Microsemi Corporation
MAX3679CTJ+T application specific timer applications.

• Routers
• Ethernet switch/router
• PCI Express 2.0/3.0
• Broadcast video/audio timing
• Processor and FPGA clocking
• Any-frequency clock conversion
• MSAN/DSLAM/PON
• Fibre Channel, SAN
• Telecom line cards
• 1 GbE and 10 GbE