Microsemi MAX3673ETN+

频率合成器带旁路LVPECLLVPECL

Overview

The MAX366 and MAX3673ETN are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. These devices are used at interfaces where sensitive circuits are connected to the external world and could encounter damaging voltages (up to 35V beyond the supply rails) during power-up, power-down, or fault conditions. The MAX366 contains three independent protectors and the MAX3673ETN contains eight. They can protect analog signals using either unipolar (4.5V to 36V) or bipolar (±2.25V to ±18V) power supplies. Each protector is symmetrical. Input and output terminals may be freely interchanged. These devices are voltage-sensitive MOSFET transistor arrays that are normally on when power is applied and normally open circuit when power is off. With ±10V supplies, on-resistance is 100Ω max and leakage is less than 1nA at +25°C. When signal voltages exceed or are within approximately 1.5V of either power-supply voltage (including when power is off), the two-terminal resistance increases dramatically, limiting fault current as well as output voltage to sensitive circuits. The protected side of the switch maintains the correct polarity and clamps approximately 1.5V below the supply rail. There are no "glitches" or polarity reversals going into or coming out of a fault condition.

Features

Tube Package
Available in the 56-WFQFN Exposed Pad
Operating supply voltage of 3.3V

Surface Mount Mounting Type

Applications

There are a lot of Microsemi Corporation
MAX3673ETN+ Clock Generators applications.

• Instrument
• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks