NXP SPC5607BF1VLU6R

e200z0h64MHz1.5MB（1.5M x 8）

Overview

The SPC5607BF1MLU6 is IC MCU 32BIT 1.5MB FLASH 176LQFP, that includes MPC56xx Qorivva Series, they are designed to operate with a Tray Packaging, Unit Weight is shown on datasheet note for use in a 0.065909 oz, that offers Mounting Style features such as SMD/SMT, Package Case is designed to work in 176-LQFP, it has an Operating Temperature range of -40°C ~ 125°C (TA), the device can also be used as 176-LQFP (24x24) Supplier Device Package. In addition, the Number of I O is 149, the device is offered in 64MHz Speed, the device has a 4K x 16 of EEPROM Size, and Core Processor is e200z0h, and the RAM Size is 96K x 8, and Program Memory Type is FLASH, and the Peripherals is DMA, POR, PWM, WDT, and Connectivity is CAN, I2C, LIN, SCI, SPI, and the Voltage Supply Vcc Vdd is 3 V ~ 5.5 V, and Core Size is 32-Bit, and the Program Memory Size is 1.5MB (1.5M x 8), and Data Converters is A/D 29x10b, 5x12b, and the Oscillator Type is Internal, it has an Maximum Operating Temperature range of + 125 C, it has an Minimum Operating Temperature range of - 40 C, and Operating Supply Voltage is 3.3 V 5 V, and the Core is e200z0, and Processor Series is MPC5607, and the Data Bus Width is 32 bit, and Maximum Clock Frequency is 64 MHz, and the Data RAM Size is 96 kB.

The SPC5607BF1VLU6 is "32-bit Microcontrollers - MCU Freescale 32-bit MCU manufactured by NXP / Freescale. The SPC5607BF1VLU6 is available in N A Package, is part of the Embedded - Microcontrollers, , and with support for "32-bit Microcontrollers - MCU Freescale 32-bit MCU, * Microcontroller IC, MCU 32-bit e200 RISC 1.5MB Flash 3.3V/5V Automotive 176-Pin LQFP Tray, 32-bit Microcontrollers - MCU Freescale 32-bit MCU, Power Arch core, 1.5MB Flash, 64MHz, -40/+105degC, Automotive Grade, QFP 176.

Features

• Up to 10 serial communication interface (LINFlex) modules

• Up to 6 enhanced full CAN (FlexCAN) modules with configurable buffers

• 1 inter-integrated circuit (I2C) interface module

• Up to 149 configurable general purpose pins supporting input and output operations (package dependent)

• Real-Time Counter (RTC)

• Clock source from internal 128 kHz or 16 MHz oscillator supporting autonomous wakeup with 1 ms resolution with maximum timeout of 2 seconds

• Optional support for RTC with clock source from external 32 kHz crystal oscillator, supporting wakeup with 1 sec resolution and maximum timeout of 1 hour

• Up to 8 periodic interrupt timers (PIT) with 32-bit counter resolution

• Nexus development interface (NDI) per IEEE-ISTO 5001-2003 Class Two Plus

• Device/board boundary scan testing supported per Joint Test Action Group (JTAG) of IEEE (IEEE 1149.1)

• On-chip voltage regulator (VREG) for regulation of input supply for all internal levels

• Single issue, 32-bit CPU core complex (e200z0h)

— Compliant with the Power Architecture? technology embedded category

— Enhanced instruction set allowing variable length encoding (VLE) for code size footprint reduction. With the optional encoding of mixed 16-bit and 32-bit instructions, it is possible to achieve significant code size footprint reduction.

• Up to 1.5 MB on-chip code flash memory supported with the flash memory controller

• 64 (4 × 16) KB on-chip data flash memory with ECC

• Up to 96 KB on-chip SRAM

• Memory protection unit (MPU) with 8 region descriptors and 32-byte region granularity on certain family members (Refer to Table 1 for details.)

• Interrupt controller (INTC) capable of handling 204 selectable-priority interrupt sources

• Frequency modulated phase-locked loop (FMPLL)

• Crossbar switch architecture for concurrent access to peripherals, Flash, or RAM from multiple bus masters

• 16-channel eDMA controller with multiple transfer request sources using DMA multiplexer

• Boot assist module (BAM) supports internal Flash programming via a serial link (CAN or SCI)

• Timer supports I/O channels providing a range of 16-bit input capture, output compare, and pulse width modulation functions (eMIOS)

• 2 analog-to-digital converters (ADC): one 10-bit and one 12-bit

• Cross Trigger Unit to enable synchronization of ADC conversions with a timer event from the eMIOS or PIT

• Up to 6 serial peripheral interface (DSPI) modules

Applications

• Automotive

• Battery Management System (BMS)

• Gateway

• Heating Ventilation, and Air Conditioning (HVAC)

• Industrial

• Industrial HMI