NXP MC9S08PA8AVTJ

S0820MHz8KB（8K x 8）

Overview

MC9S08PA8AVTG with pin details, that includes S08 Series, they are designed to operate with a Tray Packaging, Package Case is shown on datasheet note for use in a 16-TSSOP (0.173", 4.40mm Width), it has an Operating Temperature range of -40°C ~ 105°C (TA), Supplier Device Package is designed to work in 16-TSSOP, as well as the 14 Number of I O, the device can also be used as 20MHz Speed. In addition, the EEPROM Size is 256 x 8, the device is offered in S08 Core Processor, the device has a 2K x 8 of RAM Size, and Program Memory Type is FLASH, and the Peripherals is LVD, POR, PWM, WDT, and Connectivity is I2C, LIN, SPI, UART/USART, and the Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V, and Core Size is 8-Bit, and the Program Memory Size is 8KB (8K x 8), and Data Converters is A/D 12x12b, and the Oscillator Type is Internal.

MC9S08PA8AVTGR with circuit diagram manufactured by NXP / Freescale. is part of the Embedded - Microcontrollers, , and with support for "8-bit Microcontrollers - MCU S08PA 8-bit MCU, * Microcontroller IC, MCU 8-bit S08 CISC 8KB Flash 3.3V/5V 16-Pin TSSOP T/R, 8-bit Microcontrollers - MCU S08PA 8-bit MCU, S08 core8KB Flsh SOP 16.

Features

? 8-Bit S08 central processor unit (CPU)

– Up to 20 MHz bus at 2.7 V to 5.5 V across operating

temperature range of -40 °C to 105 °C for V part and

-40 °C to 125 °C for M part.

– Supporting up to 40 interrupt/reset sources

– Supporting up to four-level nested interrupt

– On-chip memory

– Up to 16 KB flash read/program/erase over full

operating voltage and temperature

– Up to 256 byte EEPROM; 2-byte erase sector;

program and erase while executing flash

– Up to 2048 byte random-access memory (RAM)

– Flash and RAM access protection

? Power-saving modes

– One low-power stop mode; reduced power wait

mode

– Peripheral clock enable register can disable clocks to

unused modules, reducing currents; allows clocks to

remain enabled to specific peripherals in stop3 mode

? Clocks

– Oscillator (XOSC) - loop-controlled Pierce

oscillator; crystal or ceramic resonator range of

31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz

– Internal clock source (ICS) - containing a frequencylocked-loop (FLL) controlled by internal or external

reference; precision trimming of internal reference

allowing 1% deviation across temperature range of 0

°C to 70 °C and 2% deviation across the whole

operating temperature; up to 20 MHz

? System protection

– Watchdog with independent clock source

– Low-voltage detection with reset or interrupt;

selectable trip points

– Illegal opcode detection with reset

– Illegal address detection with reset

Applications

 switch