NXP MKE02Z32VLH4

ARM® Cortex®-M0+40MHz32KB（32K x 8）

Overview

MKE02Z32VLD4 with pin details, that includes Kinetis KE02 Series, they are designed to operate with a Tray Packaging, Package Case is shown on datasheet note for use in a 44-LQFP, it has an Operating Temperature range of -40°C ~ 105°C (TA), Supplier Device Package is designed to work in 44-LQFP (10x10), as well as the 37 Number of I O, the device can also be used as 40MHz Speed. In addition, the EEPROM Size is 256 x 8, the device is offered in ARMR CortexR-M0+ Core Processor, the device has a 4K x 8 of RAM Size, and Program Memory Type is FLASH, and the Peripherals is LVD, PWM, WDT, and Connectivity is I2C, SPI, UART/USART, and the Voltage Supply Vcc Vdd is 2.7 V ~ 5.5 V, and Core Size is 32-Bit, and the Program Memory Size is 32KB (32K x 8), and Data Converters is A/D 16x12b, D/A 2x6b, and the Oscillator Type is Internal.

MKE02Z32VLD4R with circuit diagram manufactured by NXP / Freescale. is part of the Embedded - Microcontrollers, , and with support for "ARM Microcontrollers - MCU Kinetis E 32-bit MCU, * Microcontroller IC, MCU 32-bit ARM Cortex M0+ CISC 32KB Flash 3.3V/5V 44-Pin LQFP T/R, ARM Microcontrollers - MCU Kinetis E 32-bit MCU, ARM Cortex-M0+ core, 32KB Flash, 40MHz, 5V, QFP 44.

Features

• System peripherals

– Power management module (PMC) with three power modes: Run, Wait, Stop

– Low-voltage detection (LVD) with reset or interrupt, selectable trip points

– Watchdog with independent clock source (WDOG)

– Programmable cyclic redundancy check module (CRC)

– Serial wire debug interface (SWD)

– Bit manipulation engine (BME)

• Security and integrity modules

– 64-bit unique identification (ID) number per chip

• Human-machine interface

– Up to 57 general-purpose input/output (GPIO)

– Two up to 8-bit keyboard interrupt modules (KBI)

– External interrupt (IRQ)

• Analog modules

– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)

– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

• Operating characteristics

– Voltage range: 2.7 to 5.5 V

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

• Performance

– Up to 40 MHz Arm? Cortex-M0+ core and up to 20 MHz bus clock

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Memories and memory interfaces

– Up to 64 KB flash

– Up to 256 B EEPROM

– Up to 4 KB RAM

• Clocks

– Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators

– Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 32 MHz system clock (able to be trimmed for up to 40 MHz system clock)

– Internal 1 kHz low-power oscillator (LPO)

Applications

• Industrial

• 3-Phase AC Induction Motor

• Air Conditioning (AC)

• Brushless DC Motor (BLDC) Control

• Building Safety

• Electricity Grid and Distribution

• Electricity Meter

• Gas Meter

• Heat Metering

• Motion Control and Robotics

• Motor Drives

• Permanent Magnet Synchronous Motor (PMSM)

• Smart Lighting

• Smart Power Socket and Light Switch

• Surround View

• Water Meter