NXP MK26FN2M0CAC18R

ARM® Cortex®-M4180MHz2MB（2M x 8）

Overview

The MK26-1C90D-500W is SENSOR REED SPDT SCREW MOUNT, that includes Series, they are designed to operate with a Reed Switch Type, Packaging is shown on datasheet note for use in a Bulk, that offers Mounting Style features such as Wire, Termination Style is designed to work in Lead Wire, it has an Operating Temperature range of -20°C ~ 80°C (TA), the device can also be used as SPST-NC Output Type. In addition, the Voltage Supply is 175V, the device is offered in Magnetic Sensing Method, the device has a Magnet of Actuator Material, and Must Operate is 45 ~ 65AT, it has an Maximum Operating Temperature range of + 80 C, it has an Minimum Operating Temperature range of - 5 C, and the Operating Supply Voltage is 175 V, and Operating Supply Current is 1 A.

MK26-1C90E-500W with circuit diagram, that includes Magnet Actuator Material, they are designed to operate with a 15 ~ 40AT Must Operate, it has an Operating Temperature range of -20°C ~ 80°C (TA), that offers Output Type features such as SPDT, Series is designed to work in , as well as the Lead Wire Termination Style, the device can also be used as Reed Switch Type. In addition, the Voltage Supply is 175V.

Features

Ultra-Low-Power

• Flexible low-power modes with power and clock gating for optimal peripheral activity and recovery times. Run power consumption down to <250 μA/MH and static power consumption down to 9.0 μA with full state retention and <6 μS wakeup. Lowest static mode down to 254 nA (VLLS0).

• Full memory and analog operation down to 1.71 volts for extended battery life

• Low-leakage wake-up unit with up to seven internal modules and over 20 pins as wake-up sources in low-leakage stop (LLS) and very low-leakage stop (VLLS) modes

• Low-power timer for continual system operation in reduced power state

Memory

• Up to 2 MB flash. Fast access, high reliability with four-level security protection

• 256 KB of SRAM

Performance

• Cortex-M4F core running at 180 MHz with single precision floating point unit and 8KB of Cache

• Up to 32-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput, with asynchronous support in Stop mode.

• Cross bar switch enables concurrent multi-leader bus accesses, increasing bus bandwidth

• Independent flash banks allow concurrent code execution and firmware updating with no performance degradation or complex coding routines

Applications

• Industrial

• Air Conditioning (AC)

• Blood Glucose Management

• Continuous Positive Airway Pressure Machine (CPAP)

• Digital Stethoscope

• Electricity Grid and Distribution

• Gas Meter

• Heart Monitors

• Heat Metering

• Home Health Gateway

• Industrial HMI

• Motor Drives

• Smart Power Socket and Light Switch

• Surround View

• Vital Signs Monitors

• Water Meter