NXP MC9S08JM60CQH

S0848MHz60KB（60K x 8）

Overview

The MC9S08JM60CQH is a 8-bit Application-specific Microcontroller based on enhanced HCS08 CPU (24MHz bus) with CISC architecture operates at a maximum frequency of 48MHz. The device incorporates 60kB internal flash, 4kB internal RAM, an analog comparator, 12-channel 12-bit A/D converter and 51 general-purpose I/O pins. This device also features peripherals like USB 2.0 full-speed (12Mbps) device controller, one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, two serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). In-circuit emulator (ICE) debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Debug module supports both tag and force breakpoints.

Features

• Up to 51 general-purpose input/output pins

• Software selectable pullups on ports when used as inputs

• Software selectable slew rate control on ports when used as outputs

• Software selectable drive strength on ports when used as outputs

• Master reset pin and power-on reset (POR)

• Internal pullup on RESET, IRQ, and BKGD/MS pins to reduce customer system cost

• 64-pin quad flat package (QFP)

• 64-pin low-profile quad flat package (LQFP)

• 48-pin quad flat no-lead (QFN)

• 44-pin low-profile quad flat package (LQFP)

Applications

• Power Management

• Consumer Electronics

• Portable Devices

• Industrial