MACOM MA4SPS402

PIN - 单100V250 mA0.06pF @ 40V, 1MHz5.8Ohm @ 10mA, 1GHz175°C（TJ）

Overview

This device is a Silicon-Glass PIN diode chip fabricated with MACOM's patented HMIC™ process. This device features two silicon pedestals embedded in a low loss, low dispersion glass. The diode is formed on the top of one pedestal and connections to the backside of the device are facilitated by making the pedestal sidewalls electrically conductive. Selective backside metallization is applied producing a surface mount device. This vertical conic topology provides for exceptional heat transfer from the active area. The topside is fully encapsulated with silicon nitride and has an additional polymer layer for scratch and impact protection. These protective coatings prevent damage to the junction and the anode air-bridge during handling and assembly.These surmount devices are suitable for usage in moderate incident power (5W C.W.) or higher incident peak power (50W) series, shunt, or series-shunt switches. Lower parasitic inductance, 0.45nH, and excellent RC constant (0.23pS), make the devices ideal for higher frequency switch elements compared to their plastic device counterparts.

Features

HMIC™ Series
at its lowest breakdown voltage of 70V

175°C (TJ) Operating Temperature

Applications

There are a lot of M/A-Com Technology Solutions
MA4SPS402 applications of RF diodes.

• Ultra high-speed switching
• Clamping circuits
• Diode ring mixer
• RF detector
• RF voltage doubler
• Wearables
• Smart metering
• Set top boxes
• RF attenuators and switches
• Low-loss, high-power limiters