Renesas HIP4086AABZT

半桥7V ~ 15V

Overview

The HIP4086AABZT and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications.The HIP4086/A have a wide range of programmable dead times (0.5μs to 4.5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor drives.The only difference between the HIP4086AABZT and the HIP4086A is that the HIP4086A has the built-in charge pumps disabled. This is useful in applications that require very quiet EMI performance (the charge pumps operate at 10MHz). The advantage of the HIP4086AABZT is that the built-in charge pumps allow indefinitely long on times for the high-side drivers.To insure that the high-side driver boot capacitors are fully charged prior to turning on, a programmable bootstrap refresh pulse is activated when VDD is first applied. When active, the refresh pulse turns on all three of the low-side bridge FETs while holding off the three high-side bridge FETs to charge the high-side boot capacitors. After the refresh pulse clears, normal operation begins.Another useful feature of the HIP4086/A is the programmable undervoltage set point. The set point range varies from 6.6V to 8.5V.

Features

Tape & Reel (TR) Package

Surface Mount Mounting Type

Applications

There are a lot of Intersil (Renesas Electronics America)
HIP4086AABZT gate drivers applications.

• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems
• LCD/LCoS/DLP portable and embedded pico projectors
• Multicolor LED/laser displays
• Smart Phones
• Portable Navigation Devices