Renesas HIP4080AIPZ

全桥9.5V ~ 15V

Overview

The HIP4080AIPZ is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080AIPZ includes an input comparator, used to facilitate the "hysteresis" and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080AIPZ is well suited for driving Voice Coil Motors, switching power amplifiers and power supplies. HIP4080AIPZ can also drive medium voltage brush motors, and two HIP4080As can be used to drive high performance stepper motors, since the short minimum "on-time" can provide fine micro-stepping capability. Short propagation delays of approximately 55ns maximize control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in precise control of the driven load. The similar HIP4081A IC allows independent control of all 4 FETs in a Full Bridge configuration.

Features

Tube Package
Embedded in the Bulk package
4 drivers
20 pins

Through Hole Mounting Type

Applications

There are a lot of Intersil (Renesas Electronics America)
HIP4080AIPZ gate drivers applications.

• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems
• LCD/LCoS/DLP portable and embedded pico projectors
• Multicolor LED/laser displays
• Smart Phones
• Portable Navigation Devices
• Portable Media Players