ON MC14490DWR2G

触点回弹消除器3V ~ 18V6

Overview

The MC14490DWR2G is constructed with complementary MOS enhancement mode devices, and is used for the elimination of extraneous level changes that result when interfacing with mechanical contacts. The digital contact bounce eliminator circuit takes an input signal from a bouncing contact and generates a clean digital signal four clock periods after the input has stabilized. The bounce eliminator circuit will remove bounce on both the "make" and the "break" of a contact closure. The clock for operation of the MC14490DWR2G is derived from an internal R-C oscillator which requires only an external capacitor to adjust for the desired operating frequency (bounce delay). The clock may also be driven from an external clock source or the oscillator of another MC14490DWR2G (see Figure 5). NOTE: Immediately after power-up, the outputs of the MC14490DWR2G are in indeterminate states.

Features

4000 Series

Surface Mount Mounting Type

Applications

There are a lot of ON Semiconductor
MC14490DWR2G Specialty Logic ICs applications.

• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio