ON FPF3042UCX

源极选择器开关N 通道2.7A

Overview

The FPF3042UCX is an 18 V-rated Dual-Input Single-Output (DISO) load switch consisting of two channels of slew-rate-controlled, low-on-resistance, N-channel MOSFET switches with protection features. The slew-rate-controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on the input power rails. The input voltage range operates from 4.0 V to 12.4 V at both VBUS and VIN to align with the needs of high-voltage portable device power rails.Both VIN and VBUS have the over-voltage protection of 14 V (typical) to avoid damage to the system.VIN and VBUS bidirectional switching allows reverse current from VOUT to VIN or VBUS for On-The-Go, (OTG) Mode. The switching is controlled by logic input EN and VIN_SEL is capable of interfacing directly with low-voltage control signal General-Purpose Input / Output (GPIO).FPF3042UCX is available in 1.76 mm x 1.96 mm Wafer-Level Chip-Scale Package (WLCSP), 16-bump, 0.4 mm pitch.

Features

IntelliMAX™ Series
in a 16-UFBGA, WLCSP case
FET Type: N-Channel
Peak Reflow Temperature (Cel) : 260
1 outputs

Surface Mount Mounting Type

Applications

There are a lot of ON Semiconductor
FPF3042UCX Ideal Diode controller applications.

• Digital Cameras
• Modems
• Cell phones
• Digital Radios
• MP3 Players
• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive battery protection
• ADAS domain controller
• Camera ECU
• Head Unit