ON FPF2488UCX

电池保护-40°C ~ 85°C（TA）

Overview

The FPF2488UCX features a 2-channel power switch, which offers surge protection and Over-Voltage Protection (OVP), to protect downstream components and enhancing overall system robustness. Channel one (VBUS) is an active-low, 28 V/2.5 A rated, power MOSFET switch with an internal clamp supporting ±100 V surge protection, highly accurate fixed OVP at 10.0 V (± 100 mV), and OTG functionality. Channel two (VIF) is a conditional active-high, 6 V/6 A rated, power MOSFET switch with an integrated TVS supporting ± 40 V surge protection and fixed OVP at 5.25 V (± 250 mV). VIF also provides Reverse Current Blocking (RCB) during its OFF state to minimize leakage current. VBUS_DET is paired with always ON LDO to power downstream devices even with VBUS is greater than 2.5 V, even when disabled through the ONB pin. This provides power sequence control or a host controlled configuration in system. The FPF2488UCX is available in a 15-bump, 1.6 mm x 2.2 mm Wafer-Level Chip-Scale Package (WLCSP) with 0.4 mm pitch.

Features

Battery Protection Function
Available in 15-UFBGA, WLCSP Package
Mounting Type: Surface Mount
operate supply voltage at the range of 4V
Supply Voltage-Max (Vsup) : 5.5V

Over Temperature, Over/Under Voltage, Reverse Current Fault Protection

Applications

There are a lot of ON Semiconductor
FPF2488UCX Battery Management ICs applications.

• Fork lifts
• Grid power infrastructure
• Cell phone towers
• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems
• Tower communications
• Weather stations
• Distributed energy resources
• Solar and wind-generating plants