ON CAT5113LI10

线性110010k上/下（U/D，INC，CS）2.5V ~ 6V-40°C ~ 85°C

Overview

The CAT5113LI10 is a single digital POT designed as an electronic replacement for mechanical potentiometers. Ideal for automated adjustments on high volume production lines, they are also well suited for applications where equipment requiring periodic adjustment is either difficult to access or located in a hazardous or remote environment.The CAT5113LI10 contains a 100-tap series resistor array connected between two terminals RH and RL. An up/down counter and decoder that are controlled by three input pins, determines which tap is connected to the wiper, RW. The CAT5113LI10 wiper is buffered by an op amp that operates rail to rail. The wiper setting, stored in non-volatile NVRAM memory, is not lost when the device is powered down and is automatically recalled when power is returned. The wiper can be adjusted to test new system values without affecting the stored setting. Wiper-control of the CAT5113LI10 is accomplished with three input control pins, CS, U/D, and INC. The INC input increments the wiper in the direction which is determined by the logic state of the U/D input. The CS input is used to select the device and also store the wiper position prior to power down.The digital POT can be used as a three-terminal resistive divider or as a two-terminal variable resistor.

Features

Bulk Package
Linear Taper
Potentiometer Configuration
1 Number of Circuits
100 Number of Taps
10k Resistance (Ohms)
Up/Down (U/D, INC, CS) Interface
2.5V ~ 6V Voltage - Supply
±20% Tolerance
300ppm/°C Temperature Coefficient (Typ)
Through Hole Mounting Type
1000 (Max) Resistance - Wiper (Ohms) (Typ)