NS LM3658SD

锂离子/聚合物1A-40°C ~ 85°C（TA）

Overview

The LM3658SD is a single chip charger IC designed for handheld applications.It can safely charge and maintain a single cell Li-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic. With both power sources present, the AC power source has priority. Charge current is programmed through an external resistor when operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USB power, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.

The LM3658SD operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode and maintenance mode. Additionally, the charger IC operates as a linear regulator in “LDO mode”, when the AC wall adapter is connected and no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurement and multiple safety timers.The LM3658SD provides two open-drain outputs for LED status indication or connection to GPIOs.

Features

Bulk Package
1 channels
Addtional features of RESTART THRESHOLD VOLTAGE IS 4 VOLT
10-WFDFN Exposed Pad package

Surface Mount Mounting Type

Applications

There are a lot of Texas Instruments
LM3658SD Battery Chargers ICs applications.

• Opportunity charge
• Fast charge
• Fleet management
• Shop charger
• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets