ST VNP49N04-E

通用1不需要30A

Overview

The VNP35NV04-E is MOSFET OMNIFETII 40V 30A TO-220, that includes OMNIFET II?, VIPower? Series, they are designed to operate with a Power Switches Product, Type is shown on datasheet note for use in a Low Side, that offers Packaging features such as Tube, Unit Weight is designed to work in 0.050717 oz, as well as the Through Hole Mounting Style, the device can also be used as TO-220-3 Package Case. In addition, the Input Type is Non-Inverting, it has an Operating Temperature range of -40°C ~ 150°C (TJ), the device has a N-Channel of Output Type, and Interface is On/Off, and the Supplier Device Package is TO-220AB, and Ratio Input:Output is 1899/12/30 1:01:00, and the Number of Outputs is 1, and Voltage Supply Vcc Vdd is Not Required, and the Fault Protection is Current Limiting (Fixed), Over Temperature, Over Voltage, and Output Configuration is Low Side, and the Rds On Typ is 13 mOhm (Max), and Voltage Load is 36V (Max), and the Current Output Max is 30A, and Switch Type is General Purpose, and the Pd Power Dissipation is 125 W, it has an Maximum Operating Temperature range of + 150 C, it has an Minimum Operating Temperature range of - 40 C, and Output Current is 30 A, and the On Resistance Max is 13 mOhms, and Off Time Max is 120 us, and the Current Limit is 30 A, and On Time Max is 12 us.

The VNP35N07FI is MOSFET POWER 70V 35A ISOWATT220, that includes 25A Current Output Max, they are designed to operate with a Current Limiting (Fixed), Over Temperature, Over Voltage Fault Protection, Features is shown on datasheet note for use in a Status Flag, that offers Input Type features such as Non-Inverting, Interface is designed to work in On/Off, as well as the 1 Number of Outputs, the device can also be used as Low Side Output Configuration. In addition, the Output Type is N-Channel, the device is offered in ISOWATT-220-3 Package Case, the device has a Tube of Packaging, and Ratio Input:Output is 1899/12/30 1:01:00, and the Rds On Typ is 280 mOhm (Max), and Series is OMNIFET?, VIPower?, and the Supplier Device Package is ISOWATT-220, and Switch Type is General Purpose, and the Voltage Load is 55V (Max), and Voltage Supply Vcc Vdd is Not Required.

Features

OMNIFET™, VIPower™ Series
Resistance of 20mOhm

Through Hole Mounting Type

Applications

There are a lot of STMicroelectronics
VNP49N04-E Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards