ST VN5T016AHTR-E

通用1不需要43A

Overview

The VN5T016AHTR-E is a device made using STMicroelectronicsVIPowertechnology, intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, overtemperature or short to VCCare reported via the current sense pin.

Output current limitation protects the device in overload condition. The device latches off in case of overload or thermal shutdown. The device is reset by a low level pass on the fault reset standby pin. A permanent low level on the inputs and fault reset standby pin disables all outputs and sets the device in standby mode.

Features

VIPower™ Series
Supplied from 24V

HPAK Supplier Device Package

Applications

There are a lot of STMicroelectronics
VN5T016AHTR-E Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD