ST VN5E006ASP-E

通用1不需要60A

Overview

The VN5E006ASP-E is a single channel high-side driver manufactured using ST proprietary VIPower M0-5 technology and housed in PowerSO-10 package. The device is designed to drive 12 V automotive grounded loads delivering protection, diagnostics. It also implements a 3 V and 5 V CMOS-compatible interface for use with any microcontroller.

The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, over-temperature indication, short-circuit to VCCdiagnosis and on-state and off-state open-load detection. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the DE pin low to share the external sense resistor with similar devices.

Features

Tube Package
General Purpose Switch Type
1 Number of Outputs
1:1 Ratio - Input:Output
High Side Output Configuration
On/Off Interface
4.5V ~ 28V Voltage - Load
Not Required Voltage - Supply (Vcc/Vdd)
60A Current - Output (Max)
4.5mOhm Rds On (Typ)
Auto Restart Features
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage Fault Protection
Surface Mount Mounting Type