ST STM8L101F3P6

STM816MHz8KB（8K x 8）

Overview

The STM8L101x1 STM8L101x2 STM8L101x3 low-power family features the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.

The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming. All STM8L101xx microcontrollers feature low power low-voltage single-supply program Flash memory. The 8-Kbyte devices embed data EEPROM. The STM8L101xx low power family is based on a generic set of state-of-the-art peripherals. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools. All STM8L low power products are based on the same architecture with the same memory mapping and a coherent pinout.

Features

? Main microcontroller features

– Supply voltage range 1.65 V to 3.6 V

– Low power consumption (Halt: 0.3 μA,

Active-halt: 0.8 μA, Dynamic Run:

150 μA/MHz)

– STM8 Core with up to 16 CISC MIPS

throughput

– Temp. range: -40 to 85 °C and 125 °C

? Memories

– Up to 8 Kbytes of Flash program including

up to 2 Kbytes of data EEPROM

– Error correction code (ECC)

– Flexible write and read protection modes

– In-application and in-circuit programming

– Data EEPROM capability

– 1.5 Kbytes of static RAM

? Clock management

– Internal 16 MHz RC with fast wakeup time

(typ. 4 μs)

– Internal low consumption 38 kHz RC

driving both the IWDG and the AWU

? Reset and supply management

– Ultra-low power POR/PDR

– Three low-power modes: Wait, Active-halt,

Halt

? Interrupt management

– Nested interrupt controller with software

priority control

– Up to 29 external interrupt sources

? I/Os

– Up to 30 I/Os, all mappable on external

interrupt vectors

– I/Os with programmable input pull-ups, high

sink/source capability and one LED driver

infrared output

Applications

Low power modes