ST STGW45NC60WD

600 V90 A302µJ（开），349µJ（关）-55°C ~ 150°C（TJ）TO-247-3

Overview

The STGW45HF60WD is IGBT 600V 70A 250W TO247, that includes 600-650V IGBTs Series, they are designed to operate with a Tube Packaging, Unit Weight is shown on datasheet note for use in a 0.229281 oz, that offers Mounting Style features such as Through Hole, Package Case is designed to work in TO-247-3, as well as the Standard Input Type, the device can also be used as Through Hole Mounting Type. In addition, the Supplier Device Package is TO-247-3, the device is offered in 250W Power Max, the device has a 55ns of Reverse Recovery Time trr, and Current Collector Ic Max is 70A, and the Voltage Collector Emitter Breakdown Max is 600V, and Current Collector Pulsed Icm is 150A, and the Vce on Max Vge Ic is 2.5V @ 15V, 30A, and Switching Energy is 300μJ (on), 330μJ (off), and the Gate Charge is 160nC, and Td on off 25°C is 30ns/145ns, and the Test Condition is 400V, 30A, 6.8 Ohm, 15V, and Pd Power Dissipation is 250 W, and the Collector Emitter Saturation Voltage is 1.9 V, and Continuous Collector Current at 25 C is 70 A, and the Gate Emitter Leakage Current is 100 nA, and Maximum Gate Emitter Voltage is 20 V.

The STGW45NC60VD is IGBT 600V 90A 270W TO247, that includes 90A Current Collector Ic Max, they are designed to operate with a 220A Current Collector Pulsed Icm, Gate Charge is shown on datasheet note for use in a 126nC, that offers Input Type features such as Standard, Mounting Type is designed to work in Through Hole, as well as the TO-247-3 Package Case, the device can also be used as Tube Packaging. In addition, the Power Max is 270W, the device is offered in 45ns Reverse Recovery Time trr, the device has a PowerMESH? of Series, and Supplier Device Package is TO-247 Long Leads, and the Switching Energy is 333μJ (on), 537μJ (off), and Td on off 25°C is 33ns/178ns, and the Test Condition is 390V, 30A, 10 Ohm, 15V, and Vce on Max Vge Ic is 2.4V @ 15V, 30A, and the Voltage Collector Emitter Breakdown Max is 600V.

Features

• 80-mΩ Single-channel High-side switch with full diagnostics

– TPS27S100A: Open-drain status output

– TPS27S100B: Current monitor analog output

• Wide operating voltage 3.5 V to 40 V

• Very-low standby current, <0.5 μA

• Operating junction temperature, –40 to 150°C

• Input control, 3.3-V and 5-V logic compatible

• High-accuracy current monitor, ±30 mA at 1 A

• Adjustable current limit (0.5-A to 6-A) with an external resistor, ±20% at 0.5 A

• Diagnostic enable the function for multiplexing of MCU, analog or digital interface

• Excellent ESD protection on IN and OUT pins

– ±16 kV IEC 61000-4-2 ESD contact discharge

– ±4 kV IEC 61000-4-4 Electrical fast transient

– ±1.0 kV/42 Ω IEC 61000-4-5 Surge

• Protection

– Overload and short-circuit-to-GND protection

– Inductive load negative voltage clamp

– Undervoltage lockout (UVLO) protection

– Thermal shutdown and swing with self-recovery

– Loss of GND protection

• Diagnostic

– On- and Off-State output Open-Load / short to

• supply detection

– Overload and short to ground detection

– Thermal shutdown and swing detection

• Thermally-Enhanced 14-Pin PWP or 16-Pin QFN package

Applications

• Programmable logic controller

• Building automation

• Telecom/networks