ST STEF033JR

电子保险丝

Overview

The STEF033JR is an integrated electronic fuse optimized for monitoring output current and the input voltage. Connected in series to the 3.3 V rail, it is able to protect the electronic circuitry on its output from overcurrent and overvoltage. The STEF033JR has controlled delay and turn-on time. When an overload condition occurs, the device limits the output current to a predefined safe value. If the anomalous overload condition persists, it goes into an open state, disconnecting the load from the power supply. If a continuous short-circuit is present on the board, when the power is re-applied the E-fuse initially limits the output current to a safe value and then goes again into the open state. The voltage clamping circuit prevents the output voltage from exceeding a fixed value, if the input voltage goes beyond this threshold. The device is equipped with a thermal protection circuit. Intervention of thermal protection is signaled to the board-monitoring circuits through an appropriate signal on the Fault pin. Unlike mechanical fuses, which must be physically replaced after a single event, the E-fuse does not degrade in its performances following short-circuit/thermal protection intervention and is reset either by re-cycling the supply voltage or using the appropriate Enable pin. The STEF033JR is also available in an auto-retry version; in case of thermal fault it automatically attempts to re-apply power to the load when the die temperature returns to a safe value.

Features

Tape & Reel (TR) Package
Tape & Reel (TR) package
STEF033 family
3.3V power supplies

Surface Mount Mounting Type

Applications

There are a lot of STMicroelectronics
STEF033JR Current Regulation/Managements applications.

• Over-current protection
• Power supply current measurement
• Level translating
• Over current monitor
• Power management
• Programmable current source
• Automotive current measurement
• Industrial applications current measurement
• Battery management
• Over current monitor