ST SPC574K72E5C6FAR

e200z2，e200z4，e200z480MHz/160MHz2.5MB（2.5M x 8）

Overview

This family of MCUs targets automotive powertrain controller applications for four-cylinder gasoline and diesel engines, chassis control applications, transmission control applications, steering and braking applications, as well as low-end hybrid applications.

Many of the applications are considered to be functionally safe and the family is designed to achieve ISO26262 ASIL-D compliance.

Features

• Two main 32-bit Power Architecture^? VLE compliant CPU core (e200z4), dual-issue, running in lockstep

• One 32-bit Power Architecture^? VLE compliant I/O processor core (e200z2)

• 2624 KB on-chip flash memory

• 64 KB on-chip general-purpose SRAM (+112 KB data RAM included in the CPUs)

• Multi-channel direct memory access controller (eDMA) with 32 channels

• Dual interrupt controller (INTC)

• Dual phase-locked loops, including one Frequency-modulated

• System integration unit lite (SIUL)

• Boot Assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART

• Generic timer module (GTM122)

• 5 Deserial Serial Peripheral Interface (DSPI) modules

• 5 LIN and UART communication interface (LINFlexD) modules

• 3 MCAN interfaces with an advanced shared memory scheme, two supporting ISO CAN-FD and one supporting TTCAN

• One Ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008

• Dual-channel FlexRay controller

• Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with partial support for 2010 standard

• Device and board test support per Joint Test Action Group (JTAG) (IEEE 1149.1)

• Single 5 V +/-10% Power supply supporting cold start conditions (down to 3.0 V)

• Designed for eTQFP144 and eLQFP176

Applications

• Automotive applications