ST M41T81M6E

时钟/日历警报器，闰年，方波输出，监视计时器

Overview

The M41T81M6E is a low-power serial RTC with a built-in 32.768 kHz oscillator (external crystal controlled). Eight bytes of the SRAM are used for the clock/calendar function and are configured in binary-coded decimal (BCD) format. An additional 12 bytes of SRAM provide status/control of alarm, watchdog and square wave functions. Addresses and data are transferred serially via a two line, bidirectional I2C interface. The built-in address register is incremented automatically after each WRITE or READ data byte.

The M41T81M6E has a built-in power sense circuit which detects power failures and automatically switches to the battery supply when a power failure occurs. The energy needed to sustain the SRAM and clock operations can be supplied by a small lithium button supply when a power failure occurs. Functions available to the user include a non-volatile, time-of-day clock/calendar, alarm interrupts, watchdog timer and programmable square wave output. The eight clock address locations contain the century, year, month, date, day, hour, minute, second and tenths/hundredths of a second in 24-hour BCD format. Corrections for 28, 29 (leap year - valid until year 2100), 30 and 31 day months are made automatically. The M41T81M6E is supplied in an 8-pin SOIC.

Features

• For all new designs use M41T81S

• Counters for tenths/hundredths of seconds, seconds, minutes, hours, days, dates, months, years, and century

• 32 KHz crystal oscillator integrating load capacitance (12.5 pF) providing exceptional oscillator stability and high crystal series resistance operation

• Serial interface supports I2C bus (400 kHz protocol)

• Ultra-low battery supply current of 0.6 ΜA (typ at 3 V)

• 2.0 to 5.5 V clock operating voltage

• Automatic switchover and deselect circuitry (for 3 V application select M41T81S datasheet)

• Power-down time stamp (HT bit) allows determination of time elapsed in battery backup

• Programmable alarm and interrupt function (valid even during battery backup mode) Accurate programmable watchdog timer (from 62.5 ms to 128 s)

• Software clock calibration to compensate for crystal deviation due to temperature

• Operating temperature of –40 to 85 °C

• ECOPACK® package available

Applications

• Industrial

• General Uses