ST IPS160H

通用1不需要2.5A

Overview

The IPS160H is a monolithic device which can drive capacitive, resistive or inductive loads with one side connected to ground; it is specifically designed to match safety integrity level (SIL) applications.

Built-in thermal shutdown protects the chip against overtemperature and short-circuit. In order to minimize the power dissipation when the output is shorted, a non-dissipative short-circuit protection (cut-off) is implemented, it limits both the output average current value and, consequently, the device overheating. The DIAG common diagnostic pin reports the thermal shutdown, open load in off-state and cut-off. Cut-off delay time can be programmed by an external capacitor.

Features

Tube Package
General Purpose Switch Type
1 Number of Outputs
1:1 Ratio - Input:Output
High Side Output Configuration
On/Off Interface
8V ~ 60V Voltage - Load
Not Required Voltage - Supply (Vcc/Vdd)
2.5A Current - Output (Max)
60mOhm Rds On (Typ)
Over Temperature, UVLO Fault Protection
Surface Mount Mounting Type