ST EVAL6472H

电源管理电机控制器/驱动器，步进板

Overview

The L6472H device, realized in analog mixed signal technology, is an advanced fully integrated solution suitable for driving two-phase bipolar stepper motors with microstepping. It integrates a dual low RDS(on)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non dissipative current control and overcurrent protection. Thanks to a new current control, a 1/16 microstepping is achieved through an adaptive decay mode which outperforms traditional implementations. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position, easily programmed through a dedicated register set.

All application commands and data registers, including those used to set analog values (i.e.: current control value, current protection trip point, deadtime, etc.) are sent through a standard 5-Mbit/s SPI. A very rich set of protections (thermal, low bus voltage, overcurrent) makes the L6472H device “bullet proof”, as required by the most demanding motor control applications.

Features

Bulk Package
Power Management Type
Motor Controller/Driver, Stepper Function
No Embedded
L6472 Utilized IC / Part
Board(s) Supplied Contents