Skyworks SI8284CC-IS

容性耦合15000Vrms

Overview

4.0 Amp ISODrivers with System Safety FeaturesThe Si828x (Si8285 and Si8286) are isolated, high current gate drivers with integrated system safety and feedback function. The devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si8285 and Si8286 isolated gate drivers utilize Silicon Labs' proprietary silicon isolation technology, supporting up to 5.0 kVrms withstand voltage per UL1577. This technology enables higher-performance, reduced variation with temperature and age, tighter part-to-part matching, and superior common-mode rejection compared to other isolated gate driver technologies.The input to the device is a complementary digital input that can be utilized in several configurations. The input side of the isolation also has several control and feedback digital signals. The controller to the device receives information about the driver side power state (Si8285) and fault state of the device and recovers the device from fault through an active-low reset pin.On the output side, the Si8285 provides separate pull-up and pull-down pins for the gate. The Si8286 has a single pin for both functions. A dedicated DSAT pin detects the desaturation condition and immediately shuts down the driver in a controlled manner. The Si8285 device also integrates a Miller clamp to facilitate a strong turn-off of the power switch. Bostock Electronics is an authorized Silicon Labs distributor.

Features

Tube Package
Capacitive Coupling Technology
1 Number of Channels
5000Vrms Voltage - Isolation
35kV/µs Common Mode Transient Immunity (Min)
50ns, 50ns Propagation Delay tpLH / tpHL (Max)
5ns Pulse Width Distortion (Max)
5.5ns, 8.5ns Rise / Fall Time (Typ)
2.5A, 3A Current - Output High, Low
4A Current - Peak Output
2.8V ~ 5.5V Voltage - Output Supply
Surface Mount Mounting Type
CQC, CSA, UL, VDE Approval Agency