Richtek RT9703GS

通用1不需要3A

Overview

The RT9703GS is a low voltage, high performance single N-MOSFET power switch, designed for power rail on/off control with low RDS(ON) ≈ 80mΩ and full protection functions. The RT9703GS equipped with a charge pump circuitry to drive the internal MOSFET switch and a flag output is available to indicate fault conditions against large di/dt which may cause the supply to fall out of regulation. In order to fit different application, an IP pin is offered for current limit point setting, a resistor from IP to ground sets the current limit for the switch.Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, a precision resistor-programmable output current limit up to 3.5A. Besides, the lower quiescent current as 30μA making this device ideal for portable battery-operated equipment.The RT9703GS is available in SOP-8 package requiring minimum board space and smallest components.

Features

Tape & Reel (TR) Package
Resistance of 80mOhm

Surface Mount Mounting Type

Applications

There are a lot of Richtek USA Inc.
RT9703GS Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards