NXP Semiconductors S25FL116K0XMFI010

2M x 86 ns-40°C ~ 85°C（TA）

Overview

Features Serial Peripheral Interface (SPI) with Multi-I/O❐ SPI Clock polarity and phase modes 0 and 3❐ Command subset and footprint compatible with S25FL-K Read❐ Normal Read (Serial):• 50 MHz clock rate (40 °C to +85 °C/105 °C)❐ Fast Read (Serial):• 108 MHz clock rate (40 °C to +85 °C/105 °C)❐ Dual Read:• 108 MHz clock rate (40 °C to +85 °C/105 °C)❐ Quad Read:• 108 MHz clock rate (40 °C to +85 °C/105 °C)❐ 54 MB/s maximum continuous data transfer rate(40 °C to +85 °C/105 °C)❐ Efficient Execute-In-Place (XIP)❐ Continuous and wrapped read modes❐ Serial Flash Discoverable Parameters (SFDP) Program❐ Serial-input Page Program (up to 256 bytes)❐ Program Suspend and Resume Erase❐ Uniform sector erase (4 kB)❐ Uniform block erase (64 kB)❐ Chip erase❐ Erase Suspend and Resume Cycling Endurance❐ 100K Program-Erase cycles, minimum Data Retention❐ 20-year data retention, minimum Security❐ Three 256-byte Security Registers with OTP protection❐ Low supply voltage protection of the entire memory❐ Pointer-based security protection feature (S25FL132K and S25FL164K)❐ Top / Bottom relative Block Protection Range, 4 kB to all of memory❐ 8-Byte Unique ID for each device❐ Nonvolatile Status Register bits control protection modes• Software command protection• Hardware input signal protection• Lock-Down until power cycle protection• OTP protection of security registers 90 nm Floating Gate Technology Single Supply Voltage❐ 2.7 V to 3.6 V (Industrial, Industrial Plus, and Extended temperature range)❐ 2.6 V to 3.6 V (Extended temperature range) Temperature Ranges❐ Industrial (40 °C to +85 °C)❐ Industrial Plus (40 °C to +105 °C)❐ Automotive, AEC-Q100 Grade 3 (–40°C to +85°C)❐ Automotive, AEC-Q100 Grade 2 (–40°C to +105°C) Package Options❐ S25FL116K• 8-lead SOIC (150 mil) – SOA008• 8-lead SOIC (208 mil) – SOC008• 8-contact WSON 5 mm x 6 mm – WND008• 24-ball BGA 6 mm  8 mm – FAB024 and FAC024• KGD / KGW❐ S25FL132K• 8-lead SOIC (150 mil) – SOA008• 8-lead SOIC (208 mil) – SOC008• 8-contact USON 4 mm  4 mm – UNF008• 8-contact WSON 5 mm  6 mm – WND008• 24-ball BGA 6 mm  8 mm – FAB024 and FAC024• KGD / KGW❐ S25FL164K• 8-lead SOIC (208 mil) – SOC008• 16-lead SOIC (300 mil) – SO3016• 8-contact WSON 5 mm  6 mm – WND008• 24-ball BGA 6 mm  8 mm – FAB024 and FAC024

Features

FLASH Memory Format
Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins
Additional Feature:ALSO CONFIGURABLE AS 16M X 1

Surface Mount Mounting Type

Applications

There are a lot of Cypress Semiconductor Corp
S25FL116K0XMFI010 Memory applications.

• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders