MPS MP5016GQH-Z

通用12.7V ~ 15V5A

Overview

The MP5016 is a protection device designed to protect circuitry on the output from transients on the input. The MP5016 also protects the input from undesired shorts and transients coming from the output.During start-up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting and MODE pin setting.The maximum load at the output is current-limited. The magnitude of the current limit is controlled by an external resistor from ILIMIT to GND. There is a fixed 2.5A current limit when ILIMIT is floating.The output voltage is limited by the output over-voltage protection (OVP) function. The clamp voltage can be set by the MODE connection.The MP5016 offers a GATE drive signal connected to an external N-channel MOSFET gate to block current flowing from the output to the input when the IC is in enable off, power shutdown, or thermal shutdown.The MP5016 is available in a QFN-10 (1.5mmx2mm) package.Applications• HDD, SSD• Hot Swaps• Wireless Modem Data Cards• PC Cards• USB Power Distribution• USB Protection• USB3.1 Power Delivery Bostock Electronics is an authorized Monolithic Power Systems distributor.

Features

Tape & Reel (TR) Package

Surface Mount Mounting Type

Applications

There are a lot of Monolithic Power Systems Inc.
MP5016GQH-Z Power Switches ICs applications.

• Set-top-box
• USB Power Distribution
• Notebook PC
• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives