Maxim MAX995ESD+

通用CMOS，推挽式，满摆幅，TTL210ns

Overview

The MAX987/MAX988/MAX991/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48μA per comparator while achieving a 120ns propagation delay. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage's unique design limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. The MAX987/MAX991/MAX995ESD have a push-pull output stage that sinks as well as sources current. Large internal output drivers allow rail-to-rail output swing with loads up to 8mA. The MAX988/MAX992/MAX996 have an open-drain output stage that can be pulled beyond VCC to 6V (max) above VEE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX987/MAX988 are available in tiny 5-pin SC70 packages, while the dual MAX991/MAX992 are available in ultra-small μMAX package.

Features

Tube Package
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX995ESD+ linear comparators applications.

• Notebooks and PDAs
• Battery-Powered Electronics
• General-Purpose Portable Devices
• General-Purpose, Low-Voltage Applications
• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management