Maxim MAX9928EVKIT+

1 - 单路电流检测单端150 kHz2.5V ~ 5.5V板MAX9928

Overview

The MAX987/MAX988/MAX991/MAX992/MAX995/ MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48μA per comparator while achieving a 120ns propagation delay. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage's unique design limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. The MAX987/MAX991/MAX995 have a push-pull output stage that sinks as well as sources current. Large internal output drivers allow rail-to-rail output swing with loads up to 8mA. The MAX988/MAX992/MAX996 have an open-drain output stage that can be pulled beyond VCC to 6V (max) above VEE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX987/MAX988 are available in tiny 5-pin SC70 packages, while the dual MAX991/MAX9928EVKIT+ are available in ultra-small μMAX package.

Features

Box Package
Current Sense Amplifier Type
150 kHz -3db Bandwidth
20 µA Current - Supply (Main IC)
2.5V ~ 5.5V Voltage - Supply, Single/Dual (±)
Fully Populated Board Type
Board(s) Supplied Contents
MAX9928 Utilized IC / Part