Maxim MAX941CSA+

带锁存器，关机CMOS，推挽式，TTL80ns

Overview

The MAX941/MAX942/MAX944 are single/dual/quad high-speed comparators optimized for systems powered from a 3V or 5V supply. These devices combine high speed, low power, and rail-to-rail inputs. Propagation delay is 80ns, while supply current is only 350μA per comparator. The input common-mode range of the MAX941/MAX942/MAX944 extends beyond both power-supply rails. The outputs pull to within 0.4V of either supply rail without external pullup circuitry, making these devices ideal for interface with both CMOS and TTL logic. All input and output pins can tolerate a continuous short-circuit fault condition to either rail. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The MAX941CSA features latch enable and device shutdown. The single MAX941CSA and dual MAX942 are offered in a tiny μMAX package. Both the single and dual MAX942 are available in 8-pin DIP and SO packages. The quad MAX944 comes in 14-pin DIP and narrow SO packages.

Features

Tube Package
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 700μA

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX941CSA+ linear comparators applications.

• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics