Maxim MAX931CSA

带电压基准CMOS，TTL12µs

Overview

The MAX931–MAX934 single, dual, and quad micropower, low-voltage comparators plus an on-board 2% accurate reference feature the lowest power consumption available. These comparators draw less than 4μA supply current over temperature (MAX931), and include an internal 1.182V ±2% voltage reference, programmable hysteresis, and TTL/CMOS outputs that sink and source current. Ideal for 3V or 5V single-supply applications, the MAX931–MAX934 operate from a single +2.5V to +11V supply (or a ±1.25V to ±5V dual supply), and each comparator's input voltage range extends from the negative supply rail to within 1.3V of the positive supply. The MAX931–MAX934's unique output stage continuously sources as much as 40mA. And by eliminating power-supply glitches that commonly occur when comparators change logic states, the MAX931–MAX934 minimize parasitic feedback, making them easier to use. The single MAX931CSA and dual MAX932/MAX933 provide a unique and simple method for adding hysteresis without feedback and complicated equations, using the HYST pin and two resistors. For applications that require increased precision with similar power requirements, see the MAX921–MAX924 data sheet. These devices include a 1% precision reference.

Features

Tube Package
CMOS, TTL output capability
with Voltage Reference IC
Operates under 0°C~70°C
Quiescent Current: 4μA

Surface Mount Mounting Type

Applications

There are a lot of Maxim Integrated
MAX931CSA+ linear comparators applications.

• Mobile Communications
• Notebooks and PDAs
• Battery-Powered Electronics
• General-Purpose Portable Devices
• General-Purpose, Low-Voltage Applications
• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end